Recruiting Experts for Industry
Locating, Screening, and presenting all levels
of qualified industrial and geotechnical personnel

Safety Bulletin – December 2012

MSHA FATALGRAM METAL/NONMETAL MINE FATALITY – On October 24, 2012, a 52-year old utility miner with 19 years of experience was killed on the surface of an underground limestone mine. He was operating a forklift, traveling on a decline toward the mine entrance, when the forklift went out of control. The forklift struck a concrete support for the belt conveyor and overturned, killing him.

Forklift accidents are on the rise!

Best Practices
1) Conduct adequate preoperational checks and ensure the service brakes are properly maintained and will stop and hold the mobile equipment prior to operating.

2) Ensure that mobile equipment operators are adequately task trained in all phases of mobile equipment operation before performing work.

3) Ensure the load is stable and secured on the forks of the forklift.

4) When descending a grade, operate the forklift with the load in the upgrade position.

5) Maintain control of self-propelled mobile equipment while it is in motion.

6) Operating speeds shall be consistent with conditions of roadways, tracks, grades, clearance, visibility, curves, and traffic.

7) Operate equipment within its designed limitations.

8) Slow down or drop to a lower gear when necessary.

9) Post speeds, especially in areas where lower speeds are warranted.

10) Always wear a seat belt when operating self-propelled mobile equipment.

http://geoweb.blackbuffer.com/PDF/safety/SB_2012_DEC_Vol_1_Issue_1.pdf